Tools Required

J 43276 Clutch Pilot Bearing Remover

Notice: When using the J 43276 Clutch Pilot Bearing Remover, always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so causes damage to the J 43276-1 tool body.

1. Remove the clutch pilot bearing using the J 43276 .

1.1.	Install the J 43276-1 into the clutch pilot bearing.

1.2.	Using a wrench, secure the J 43276-1.

1.3.	Insert the J 43276-2 into the J 43276-1.

1.4.	Rotate the J 43276-2 clockwise into the J 43276-1 until the clutch pilot bearing is completely removed from the crankshaft.

1.5.	Rotate the J 43276-2 counterclockwise to remove the J 43276-2 from the J 43276-1.

1.6.	Remove the J 43276-1 from the tool body.




2. Discard the pilot bearing.