Valve Rocker Arm Cover Removal Left Side

Important: Do not remove the Positive Crankcase Ventilation (PCV) valve grommet from the cover unless service is required.

If the grommet has been removed from the cover, a NEW grommet must be installed.
1. Remove the ignition coil and bracket assembly and bolts.



2. Remove the valve rocker arm cover bolts.
3. Remove the valve rocker arm cover.



4. Remove the gasket (1) from the cover.
5. Discard the gasket.

The bolt grommets may be reused if not damaged.




6. Remove the ignition coils, wire harness, and bolts from the bracket (if required).

Valve Rocker Arm Cover Removal Right Side

Important: Do not remove the oil fill tube from the cover unless service is required.

If the oil fill tube has been removed from the cover, install a NEW tube during assembly.
1. Remove the ignition coil and bracket assembly and bolts.



2. Remove the valve rocker arm cover bolts.
3. Remove the valve rocker arm cover.



4. Remove the oil fill cap from the oil fill tube.
5. Remove the oil fill tube (if required).
6. Discard the oil fill tube.



7. Remove the gasket (1) from the cover.
8. Discard the gasket.

The bolt grommets may be reused if not damaged.




9. Remove the ignition coils, wire harness, and bolts from the bracket (if required).