For 1990-2009 cars only
Removal Procedure
- Insert a flat bladed tool under the rear edge of the switch trim plate.
- Gently pry upwards to release the rear edge of the switch trim plate from the door trim panel.
- Slide the switchplate rearwards to release the front retainer tabs.
- Disconnect the electrical connectors.
- Remove the switch pack (2) by releasing the retaining tabs on the switch trim plate (1).
Installation Procedure
- Snap the switch pack into the switch trim plate.
- Install the electrical connectors.
- Install the front end of the switch plate into the door trim panel.
- Press down on the rear of the switch plate to engage the retainer clips.
