GM Service Manual Online
For 1990-2009 cars only

CHIRP/SQUEAK-GLASS CHANNEL APPLY SILICONE PASTE

SUBJECT: CHIRP OR SQUEAK NOISE FROM GLASS RUN CHANNEL CONTACT TO DROP RAIL (APPLY SILICONE PASTE)

VEHICLES AFFECTED: 1991-92 "C" - 1992 "H" MODELS

CONDITION:

---------- A chirp or squeak sound may be heard on 1991-92 C and 1992 H models from the glass run channel rubber moulding where it contacts the drip rail.

CORRECTION:

----------- To correct this condition, apply silicone paste GM Part Number #1974984 to the portion of the run channel that contacts the drip rail moulding in the areas shown on the illustration. The silicone paste should be applied the entire length of the run channel lip on both the front and rear doors.

Parts are currently available from CANSPO.

WARRANTY INFORMATION:

For vehicles being repaired under warranty use:

Labour Time: .2 Hr. (One or All Doors)


Object Number: 94052  Size: SF

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.