GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - AWD 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Temperature Valve Actuator Replacement - Left Side

Removal Procedure
  1. Remove the knee bolster. Refer to Knee Bolster Replacement .

    2. Important: The HVAC controls must be set to the vent mode to position the defroster door lever for access to the air temperature actuator.

  2. Set the HVAC controls to the vent mode and full cold to position the defroster door lever.

    3. Object Number: 860415 Size: SH
  3. Remove the left hand temperature door lever bolt (3) from the HVAC module.
  4. Disconnect and remove the left hand temperature door lever spring (2).
  5. Disconnect and remove the left hand temperature door lever (1) from the left hand temperature door.

    6. Object Number: 295297 Size: SH
  6. Disconnect the left hand air temperature actuator electrical connector.

    7. Object Number: 651494 Size: SH
  7. Remove the left hand air temperature actuator mounting screws.
  8. Remove the left hand air temperature actuator.

Installation Procedure

    Object Number: 651494 Size: SH
  1. Install the left hand air temperature actuator.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the left hand air temperature actuator mounting screws.

    3. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).


    Object Number: 295297 Size: SH
  3. Connect the left hand air temperature actuator electrical connector.

    4. Important: Confirm the temperature mode is set to cold. Align the pin on the left hand air temperature actuator with the slot in the left hand temperature door lever.

  4. Install the left hand temperature door lever (1) to the left hand temperature door.

    5. Object Number: 860415 Size: SH
  5. Connect the left hand temperature door lever spring (2) to the left hand temperature door lever (1) and HVAC module case.
  6. Install the left hand temperature door lever bolt (3) to the HVAC module case.

    7. Tighten
    Tighten the bolt to 0.9 N·m (8 lb in).

  7. Install the knee bolster. Refer to Knee Bolster Replacement .