GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - AWD 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Wheel Control Switch Assembly Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR System. Refer to SIR Disabling and Enabling in SIR.

    2. Object Number: 691015 Size: SH
  2. Remove the steering wheel. Refer to Steering Wheel Replacement .
  3. Remove the retaining screws (2, 3) from the steering wheel rear bezel.
  4. Remove the steering wheel rear bezel (1).

    5. Object Number: 691024 Size: SH
  5. Disconnect the electrical connector.
  6. Insert a small, blunt-ended tool into the access hole in the back of the steering wheel. Push the switch out of the steering wheel.

Installation procedure

    Object Number: 691024 Size: SH
  1. Connect the electrical connector.
  2. Align the switch to the opening in the steering wheel.
  3. Push the switch into the steering wheel.

    4. Object Number: 691015 Size: SH
  4. Install the steering wheel rear bezel  (1).

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the retaining screws (2, 3) to the steering wheel rear bezel.

    6. Tighten
    Tighten the screws to 3 N·m (27 lb in).

  6. Install the steering wheel. Refer to Steering Wheel Replacement .
  7. Enable the SIR System. Refer to SIR Disabling and Enabling in SIR.