GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Aztek - AWD 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 623048 Size: SH
  2. Remove the stabilizer shaft link bolt and nut.
  3. Use a pry bar in order to remove the stabilizer shaft link insulators and the spacer.

Installation Procedure
  1. Use a pry bar in order to install the stabilizer shaft link insulators and the spacer.

    2. Object Number: 623048 Size: SH
  2. Install the stabilizer shaft link and insulators.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft link bolt and nut.

    4. Tighten
    Tighten the stabilizer shaft link nut to 18 N·m (13 lb ft).

  4. Lower the vehicle.