Schematic Reference: Interior Lights Dimming Schematics

Connector End View Reference: Master Electrical Component List

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Turn the ignition to the ON position.
2. Turn the dome lamp switch to the interior lamps OFF position.
3. Open the driver side door.

Do the interior lamps remain OFF?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

1. Disconnect the headlamp switch.
2. Install a jumper between the interior lamps OFF circuit and ground.

Do the interior lamps turn OFF?

Go to Step 5

Go to Step 4

Test the interior lamps OFF circuit for an open or a short to battery positive voltage. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 7

Go to Step 6

Replace the headlamp switch. Refer to Headlamp Switch Replacement .

Did you complete the repair?

Go to Step 7

--

Replace the body control module (BCM). Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3