GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Opel 🢒 2007 🢒 Antara 🢒 General Information 🢒 General Information 🢒 Rear Wheel Speed Sensor Replacement

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear wheel. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 1797656 Size: SH
  3. Disconnect the electrical connector (1) from the rear wheel speed sensor.

    4. Object Number: 1797658 Size: SH
  4. Remove the bolt (2) and the rear wheel speed sensor (1).

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1797658 Size: SH
  1. Install the bolt (2) and rear wheel speed sensor (1).

    2. Tighten
    Tighten the bolt to 8 N·m (71 lb in).


    Object Number: 1797656 Size: SH
  2. Connect the electrical connector (1) to the rear wheel speed sensor.
  3. Install the rear wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.