GM Service Manual Online
For 1990-2009 cars only

Air Conditioning Compressor Oil Balancing with C60

Draining Procedure

    Important: Drain and measure as much of the refrigerant oil as possible from the removed compressor.

  1. Drain the oil from both the suction and discharge ports of the removed compressor into a clean, graduated container.
  2. Rotate the compressor shaft to assist in draining the compressor.


    Object Number: 821777  Size: SH
  3. Measure and record the amount of oil drained from the removed compressor.
  4. This measurement will be used during installation of the replacement compressor.

  5. Properly discard the used refrigerant oil.

Balancing Procedure

    Important: The refrigerant oil in the A/C system must be balanced during compressor replacement.

  1. The replacement compressor is shipped with 80 ml (2.7 oz) of refrigerant oil.

  2. Object Number: 823337  Size: SH
  3. Compare the amount of refrigerant oil recorded during compressor removal to the amount of refrigerant oil shipped in the replacement compressor.
  4. If the amount of refrigerant oil drained and recorded from the removed compressor is:

    • Less than 80 ml (2.7 oz)
    • Leave the 80 ml (2.7 oz) in the replacement compressor.
    • More than 80 ml (2.7 oz)
    • Add to the compressor the difference between the 80 ml (2.7 oz) and the amount drained.

Air Conditioning Compressor Oil Balancing with C69

Draining Procedure

    Important: Drain and measure as much of the refrigerant oil as possible from the removed compressor.

  1. Drain the oil from both the suction and discharge ports of the removed compressor into a clean, graduated container.
  2. Rotate the compressor shaft to assist in draining the compressor.


    Object Number: 821777  Size: SH
  3. Measure and record the amount of oil drained from the removed compressor.
  4. This measurement will be used during installation of the replacement compressor.

  5. Properly discard the used refrigerant oil.

Balancing Procedure

    Important: The refrigerant oil in the A/C system must be balanced during compressor replacement.

  1. The replacement compressor is shipped with 100 ml (3.38 oz) of refrigerant oil.

  2. Object Number: 823337  Size: SH
  3. Compare the amount of refrigerant oil recorded during compressor removal to the amount of refrigerant oil shipped in the replacement compressor.
  4. If the amount of refrigerant oil drained and recorded from the removed compressor is:

    • Less than 100 ml (3.38 oz)
    • Leave the 100 ml (3.38 oz) in the replacement compressor.
    • More than 100 ml (3.38 oz)
    • Add to the compressor the difference between the 100 ml (3.38 oz) and the amount drained.