GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Silhouette Ext. 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Adjuster Track Finish Cover Replacement

Removal Procedure
  1. Remove the map pocket net attachment, if equipped. Refer to Front Seat Map Pocket Net Replacement .
  2. Remove the cup holder, if equipped. Refer to Front Seat Cup Holder Replacement .

    3. Object Number: 317083 Size: SH
  3. Remove the finish cover screws.
  4. Remove the front seat adjuster switch from the finish cover, if equipped.
  5. Remove the finish covers from the front seat frame.

Installation Procedure
  1. Install the front seat adjuster switch to the finish cover, if equipped.

    2. Object Number: 455475 Size: SH
  2. Install the finish covers to the front seat frame.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the finish cover screws.

    4. Tighten
    Tighten the finish cover screws to 2 N·m (18 lb in).

  4. Install the cup holder, if equipped. Refer to Front Seat Cup Holder Replacement .
  5. Install the map pocket net attachment, if equipped. Refer to Front Seat Map Pocket Net Replacement .