GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Silhouette Ext. 🢒 Body and Accessories 🢒 Doors 🢒 Front Door Module Replacement

Removal Procedure
  1. Remove the front door trim panel. Refer to Door Trim Panel Replacement .
  2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Remove the front door window. Refer to Front Side Door Window Replacement .
  4. Disconnect the electrical connectors.

    5. Object Number: 319779 Size: SH
  5. Remove the front door lock module screws.
  6. Remove the front door lock module from the front door.

Installation Procedure

    Object Number: 319779 Size: SH
  1. Install the front door lock module to the front door.
  2. Align the lock module locator pin into the upper edge of the front door.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the front door lock module screws.

    4. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  4. Connect the electrical connectors.
  5. Install the front door window. Refer to Front Side Door Window Replacement .
  6. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the front door trim panel. Refer to Door Trim Panel Replacement .