Schematic Reference: Instrument Cluster Schematics

Did you perform the IPC Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Install a scan tool.
2. Turn ON the ignition, with the engine OFF.
3. With a scan tool, observe the Engine Oil Life percent in PCM IPC data list.

Does the scan tool display zero percent while the Change Engine Oil message is inoperative?

Go to Step 3

System OK

Important: Perform the set up procedure for the replacement IPC.

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2