When installing new rotors, do not refinish the new rotors' surface because the rotors are already at the correct level of finish.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tire and Wheel.
3. Remove the caliper. Refer to Brake Caliper Replacement .
4. Disconnect the rotor from the hub and bearing assembly.

1. Position the rotor on the hub and bearing assembly.
2. Install the caliper. Refer to Brake Caliper Replacement .
3. Install tire and wheel assembly.
4. Lower the vehicle.