For 1990-2009 cars only
Removal Procedure
- Open the vanity cover.
- Use a thin-bladed tool in order to disengage the 2 front snap legs at the lower edge of the sunshade.
- Pull the vanity out and downward in order to access the electrical connections.
- Disconnect the wire connectors from the vanity, if equipped.
- Remove the vanity mirror.
Important: Note the wire routing for installation.
Installation Procedure
- Connect the wire connectors, if equipped.
- Insert the top end of the vanity into the sunshade.
- Firmly apply pressure to engage the snap legs.
- Close the vanity mirror cover.
