Rear Side Door Trim Panel Insert Replacement Oldsmobile

1. Remove the bezel handle opening cover.

Gently use a small, flat-bladed tool in order to remove the cover.

2. Release the retainers at the top of the switch bezel.

Use a small, flat-bladed tool under the forward (vertical) edge of the switch bezel in order to release the plastic tabs on the upper and lower trim edges.

3. Pull the bezel from the door.

Disconnect the electrical connector.

4. Remove the bezel.

1. Connect the electrical connector.
2. Align the bezel with the trim panel.
3. Align the lock rod with the lock rod knob.
4. Install the bezel to the trim panel.

Carefully push inward the top of the bezel in order to secure.

5. Install the bezel handle opening cover.