GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 323134  Size: SH

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.
  2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement
  3. .

  4. Remove the water deflector. Refer to Door Water Deflector Replacement .
  5. Disconnect the electrical connector (1).
  6. Insert a thin flat-bladed tool between the express down module and the retaining clip.
  7. Remove the express down module (2).

Installation Procedure


    Object Number: 323134  Size: SH
  1. Install the express down module (2).
  2. Connect the electrical connector (1).
  3. Install the water deflector. Refer to Door Water Deflector Replacement .
  4. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
  5. Connect the negative battery cable.