Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Disconnect the LH front power window switch connector.
2. Place the ignition switch in the RUN position.
3. Use a digital multimeter (DMM) in order to backprobe the LH front power window switch from terminal F to ground.

Does the voltage measure within the specified range?

10-15 V

Go to Step 3

Go to Step 6

Use a DMM in order to backprobe the LH front power window switch from terminal F to terminal E.

Does the voltage measure within the specified range?

10-15 V

Go to Step 5

Go to Step 4

Repair the open in CKT 1250.

Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--

Replace the LH front power window switch.

Refer to one of the following procedures:

Is the repair complete?

--

Go to Power Windows System Check

--

Repair the open in CKT 141.

Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--