Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the entire RAP System Check performed? | -- | Go to Step 2 | |||||||||
2 |
Is the voltage within the specified range? | 10-15 V | Go to Step 3 | Go to Step 4 | ||||||||
3 | Measure the voltage from the RAP relay terminal 85 to ground. Is the voltage within the specified range? | 10-15 V | Go to Step 5 | Go to Step 6 | ||||||||
4 | Repair the open or short to ground in CKT 1342 (RED). Is the repair complete? | -- | -- | |||||||||
5 | Measure the voltage from the RAP relay terminal 87A to ground. Is the voltage within the specified range? | 10-15 V | Go to Step 7 | Go to Step 8 | ||||||||
6 | Repair the open or short to voltage in CKT 1540 (ORN) . Is the repair complete? | -- | -- | |||||||||
7 |
Is battery voltage present for approximately 10 minutes? | -- | Go to Step 11 | Go to Step 14 | ||||||||
8 |
Are the circuits OK? | -- | Go to Step 9 | Go to Step 10 | ||||||||
9 | Replace the ignition switch. Refer to Steering Wheel and Column. Is the repair complete? | -- | ||||||||||
10 | Repair the faulty circuit. Is the repair complete? | -- | -- | |||||||||
11 | Ensure that the RAP relay terminals are clean and tight. Are the terminals OK? | -- | Go to Step 12 | Go to Step 13 | ||||||||
12 | Replace the RAP relay. Is the repair complete? | -- | -- | |||||||||
13 | Clean or repair the RAP relay terminals. Is the repair complete? | -- | -- | |||||||||
14 |
Is the voltage within the specified range? | 10-15 V | Go to Step 15 | Go to Step 16 | ||||||||
15 | Measure the voltage from the RFA module connector terminals F15 to terminal F16. Is the voltage within the specified range? | 10-15 V | Go to Step 17 | Go to Step 18 | ||||||||
16 | Repair open or short to ground in CKT 143 (YEL). Is the repair complete? | -- | -- | |||||||||
17 | Measure the voltage from the RFA module connector terminals E16 to F16. Is the voltage within the specified range? | 10-15 V | Go to Step 19 | Go to Step 20 | ||||||||
18 | Repair the open or short to ground in CKT 1250 (BLK). Is the repair complete? | -- | -- | |||||||||
19 | Measure the voltage from RFA module connector terminals E15 to F16. Is the voltage within the specified range? | 10-15 V | Go to Step 21 | Go to Step 22 | ||||||||
20 | Repair the open or short to ground in CKT 1540 (ORN). Is the repair complete? | -- | -- | |||||||||
21 |
Is the value within the specified range? | Infinite | Go to Step 23 | Go to Step 26 | ||||||||
22 | Repair CKT 39 (PNK) wiring for an open or a short to ground. Is the repair complete? | -- | -- | |||||||||
23 | Ensure that the RFA terminals are clean and tight. Are the terminals OK? | -- | Go to Step 24 | Go to Step 25 | ||||||||
24 | Replace the RFA module. Refer to Remote Control Door Lock Receiver Replacement . Is the repair complete? | -- | -- | |||||||||
25 | Clean or repair the RFA terminals. Is the repair complete? | -- | -- | |||||||||
26 | Repair the short to ground in CKT 49 (DK BLU), CKT 727 (DK BLU/WHT) or the door switches. Is the repair complete? | -- | -- |
