GM Service Manual Online
For 1990-2009 cars only

Control Assembly Replacement Pontiac

  1. Remove the I/P accessory trim plate. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Guages and Console.

  2. Object Number: 401592  Size: SH
  3. Remove the retaining screws from the HVAC control assembly.
  4. Pull the assembly out from the instrument panel.
  5. Disconnect the electrical connector.
  6. Remove the HVAC control assembly.

Installation Procedure

  1. Connect the electrical connector to the HVAC control assembly.

  2. Object Number: 401592  Size: SH
  3. Install the HVAC control assembly into the instrument panel by snapping into place.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the retaining screws to secure the HVAC control assembly.
  6. Tighten
    Tighten the fasteners to 1.8 N·m (16 lb in).

  7. Install the I/P accessory trim plate. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Guages and Console.

Control Assembly Replacement Oldsmobile

Removal Procedure

  1. Remove the I/P cluster trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Guages and Console.

  2. Object Number: 401600  Size: SH
  3. Gently pry the assembly out from the instrument panel.

  4. Object Number: 401596  Size: SH
  5. Disconnect the electrical connector.
  6. Remove the HVAC control assembly.

Installation Procedure


    Object Number: 401596  Size: SH
  1. Connect the electrical connector to the HVAC control assembly.

  2. Object Number: 401600  Size: SH
  3. Install the HVAC control assembly into the instrument panel by snapping into place.
  4. Install the I/P cluster trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Guages and Console.

Control Assembly Replacement Buick

Removal Procedure

  1. Remove the I/P cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Guages and Console.

  2. Object Number: 401603  Size: SH
  3. Remove the retaining screws from the HVAC control assembly.
  4. Pull the assembly out from the instrument panel.

  5. Object Number: 401714  Size: SH
  6. Disconnect the electrical connector and remove the HVAC control assembly.

Installation Procedure


    Object Number: 401714  Size: SH
  1. Connect the electrical connector to the HVAC control assembly.

  2. Object Number: 401603  Size: SH
  3. Install the HVAC control assembly into the instrument panel.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the retaining screws to secure the HVAC control assembly.
  6. Tighten
    Tighten the fasteners to 1.8 N·m (16 lb in).

  7. Install the I/P cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Guages and Console.