Crankcase Ventilation System Inspection VIN K

1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
2. Remove the MAP sensor electrical connector (2) from the MAP sensor (1).



3. Remove the MAP sensor (1).
4. Use a 16 mm socket to press the access cover (2) down and rotate 1/4 turn counterclockwise.
5. Remove the access cover.
6. Remove the PCV valve (3) and the O-ring (4) from the intake manifold.

1. Install the crankcase ventilation valve (3) ; replace the O-ring (4) if necessary.
2. Install the access cover (2).
3. Install the MAP sensor.



4. Install the MAP sensor electrical connector (2) to the MAP sensor (1).
5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .

Crankcase Ventilation System Inspection VIN 1

1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .



2. Remove the 2 access cover retaining bolts (1), while holding down the crankcase ventilation valve access cover (2).
3. Remove the crankcase ventilation valve access cover (2).
4. Remove the spring (3).
5. Remove the crankcase ventilation valve (4) and O-ring (5).

1. Install the crankcase ventilation valve (4) and O-ring (5).
2. Install the spring (3).
3. Install the crankcase ventilation valve access cover (2).
4. Install the 2 access cover retaining bolts, while holding down the crankcase ventilation valve access cover.
5. Reinstall the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .