GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Cutlass 🢒 Body and Accessories 🢒 Doors 🢒 Door Handle Bezel Replacement

Removal Procedure

    Object Number: 445115 Size: SH
  1. Remove the door handle bezel screw (1) from the handle bezel (2).
  2. Remove the power door lock switch, if equipped. Refer to Door Lock Switch Replacement .

Installation Procedure

    Object Number: 445115 Size: SH
  1. Install the power door lock switch, if equipped. Refer to Door Lock Switch Replacement .

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the door handle bezel screw (1) to the door handle bezel (2).

    3. Tighten
    Tighten the door handle bezel screw to 2 N·m (20 lb in).