Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Use a test lamp in order to backprobe connector C3 of the
left IP junction block between terminal A9 and ground.
- Press and hold the rear compartment lid release switch.
Does the test lamp light?
| --
|
Go to Step 2
|
Go to Step 3
|
2
| Review the option content of the vehicle.
Is the vehicle equipped with keyless entry?
| --
|
Go to Step 4
|
Go to Step 5
|
3
|
- With the parking brake ON, move the gear selector to any position
except the PARK position or the NEUTRAL position.
- Use the J 39200
Digital
Multimeter (DMM) in order to backprobe connector C1 of the left
IP junction block between terminal F3 and ground.
- Press and hold the rear compartment lid release switch.
Does the voltage measure within the specified range?
| B+
|
Go to Step 6
|
Go to Step 7
|
4
|
- Use a test lamp in order to backprobe the remote control door
lock receiver between terminal H and ground.
- Press and hold the rear compartment lid release switch.
Does the test lamp light?
| --
|
Go to Step 8
|
Go to Step 9
|
5
|
- Disconnect the rear compartment lid release motor connector.
- Connect a test lamp between terminal C of the rear compartment
lid release motor connector and ground.
- Press and hold the rear compartment lid release switch.
Does the test lamp light?
| --
|
Go to Step 19
|
Go to Step 10
|
6
|
- Disconnect connector C1 of the transaxle range switch.
- Use the J 39200
in
order to measure the voltage between terminal A of transaxle range
switch connector C1 and ground.
- Press and hold the rear compartment lid release switch.
Does the voltage measure within the specified range?
| B+
|
Go to Step 11
|
Go to Step 12
|
7
| Use a test lamp
in order to backprobe the left IP junction block between terminal C3
of connector C1 and ground.
Does the test lamp light?
| --
|
Go to Step 13
|
Go to Step 28
|
8
|
- Disconnect the remote control door lock receiver connector.
- Connect J 36169-A
between terminal G and terminal H of the remote control
door lock receiver connector.
- Press and hold the rear compartment lid release switch.
Does the rear compartment lid release motor operate?
| --
|
Go to Step 14
|
Go to Step 15
|
9
| Repair the open in CKT 382, between the left IP junction block
and the remote control door lock receiver. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
10
| Repair the open in CKT 56, between the left IP junction
block and the rear compartment lid release motor. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
11
| Use the J 39200
DMM in order to measure the resistance between terminal D of
transaxle range switch connector C1 and ground.
Does the resistance measure within the specified range?
| 0-2 ohms
|
Go to Step 16
|
Go to Step 17
|
12
| Repair the open in CKT 1737, between the left IP junction block
and the transaxle range switch. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
13
|
- Use a test lamp in order to backprobe the left IP junction block
between terminal D4 of connector C1 and ground.
- Press and hold the rear compartment lid release switch.
Does the test lamp light?
| --
|
Go to Step 22
|
Go to Step 18
|
14
| Replace the remote control door lock receiver. Refer to
Receiver Replacement
in Keyless
Entry.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
15
|
- Reconnect the remote control door lock receiver connector.
- Disconnect the rear compartment lid release motor connector.
- Connect a test lamp between terminal C of the rear compartment
lid release motor connector and ground.
- Press and hold the rear compartment lid release switch.
Does the test lamp light?
| --
|
Go to Step 19
|
Go to Step 20
|
16
|
- ConnectJ 36169-A
between
terminal A and terminal D of transaxle range switch connector C1.
- Press the rear compartment lid release switch.
Does the rear compartment lid release motor operate?
| --
|
Go to Step 21
|
Go to Step 22
|
17
| Repair the open in CKT 451 between the transaxle range switch
and ground splice pack G102. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
18
| Use a test lamp in order to backprobe the rear compartment
lid release switch between terminal D and ground.
Does the test lamp light?
| --
|
Go to Step 23
|
Go to Step 24
|
19
|
- Connect a test lamp between terminal B and terminal C
of the rear compartment lid release motor connector.
- Press and hold the rear compartment lid release switch.
Does the test lamp light?
| --
|
Go to Step 25
|
Go to Step 26
|
20
| Repair the open in CKT 56 between the remote control
door lock receiver and the rear comportment lid release motor. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
21
|
- Inspect the adjustment of the park neutral position switch.
- If OK, replace the park neutral position switch. Refer to
Park/Neutral Position Switch Replacement
in Automatic Transaxle - 4T40 E.
Is repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
22
|
- Reconnect the transaxle range switch connector C1 (from
Step 16 only).
- Exchange the rear compartment lid release relay with a known good
relay from the underhood wiring harness junction block.
- Verify that the transaxle is in the PARK or the NEUTRAL position.
- Press and hold the rear compartment lid release switch.
Does the rear compartment lid release motor operate?
| --
|
Go to Step 27
|
Go to Step 28
|
23
|
- Use a test lamp in order to backprobe the rear compartment lid
release switch between terminal A and ground.
- Press and hold the rear compartment lid release switch.
Does the test lamp light?
| --
|
Go to Step 29
|
Go to Step 30
|
24
| Repair the open in CKT 1040, between the left IP
junction block and the rear compartment lid release switch. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
25
| Replace the rear compartment lid release motor. Refer to
Lock System Replacement - Rear Compartment
in Body Rear End.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
26
| Repair the open in CKT 750 between the rear compartment
lid release motor and ground splice pack G401. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
27
| Replace the faulty relay.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
28
| Replace the left IP junction block. Refer to
Relay/Fuse Center Replacement
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
29
| Repair the open in CKT 1576 between the left IP
junction block and the rear compartment lid release switch. Refer to
Wiring Repairs
in Wiring Systems.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
30
| Replace the rear compartment lid release switch. Refer
to
Fuel/Rear Compartment Release Switch Replacement
in Instrument Panel, Gauges and Console.
Is the repair complete?
| --
| Go to
Rear Compartment Lid Release System Check
| --
|
