For 1990-2009 cars only
- Slide the sunroof sunshade completely open.
- Completely close the sunroof window.
- Loosen the adjusting screws (2).
- Adjust the corners of the window panel.
- Adjust the front of the sunroof window (2) to 1 mm (0.03 in) (3) below the top surface of the roof panel.
- Adjust the rear of the sunroof window to 1 mm (0.03 in) (1) above the top surface of the roof panel.
- Tighten the adjusting screws (2).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the adjusting screws to 4 N·m (35 lb in).
