Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the test lamp light? | -- | ||
2 | Connect a test lamp between terminal N and terminal P of the remote control door lock receiver connector. Does the test lamp light? | -- | ||
3 | Use a test lamp in order to backprobe the left IP junction block with a test lamp between terminal A11 of connector C3 and ground. Does the test lamp light? | -- | ||
4 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | -- | |
5 | Repair the open in CKT 850 between the remote control door lock receiver and ground splice pack G402. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Repair the open in CKT 1040 between the remote control door lock receiver and the left IP junction block. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
7 | Replace the left IP junction block. Refer to Relay/Fuse Center Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | -- |
