GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Cutlass 🢒 Body and Accessories 🢒 Keyless Entry 🢒 Transmitter Battery Replacement

Removal Procedure

    Object Number: 277192 Size: SH
  1. Open the transmitter case (6,4).
    2. 1.1. Insert a dime between the 2 halves of the transmitter case (6,4) at the slot provided near the key ring hole (5).
    1.2. Twist the dime in order to open the case.
  2. Remove the battery (2).

Installation Procedure

    Object Number: 277192 Size: SH
  1. Install the battery (2).
  2. Use one 3-volt CR2032 battery or the equivalent.
  3. Install the battery with the positive side down.
  4. Close the transmitter case (6,4).
  5. Ensure that the seal is in position. Align the 2 halves of the case (6,4) and snap the 2 halves together.
  6. Verify the operation of the transmitter.
  7. A malfunctioning transmitter may need resynchronization. Refer to Transmitter Synchronization .
  8. The normal battery life is approximately 2 years. Replace the batteries when the range of the transmitter begins to decrease to less than approximately 7 meters (23 ft).