Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the DRL System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Use a test lamp in order to backprobe the turn/headlamp switch assembly between terminal 34 of the turn/headlamp switch assembly connector C1 and ground. Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Replace the underhood junction block. Refer to Relay/Fuse Center Replacement in Wiring Systems Is the repair complete? | -- | -- | |
5 | Replace the turn/headlamp switch assembly. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column-Tilt. Is the repair complete? | -- | -- | |
6 | Repair the open in CKT 1201 between the underhood junction block and the turn/headlamp switch assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
