| Table 1: | Pontiac and Oldsmobile w/o Outside Recirculated Air Option |
| Table 2: | Outside Recirculated Air Option (Oldsmobile Only) |
Perform the Functional Test and the diagnostic tests in order to verify the following systems:
| • | Air conditioning |
| • | Electrical |
| • | Vacuum |
| • | Refrigeration |
- Operate the blower motor at all speeds with the mode lever in any position, and engage the compressor clutch. This will indicate that the electrical circuits and the vacuum circuits are functioning properly.
- With your hand, feel the temperature of the evaporator inlet pipe and the accumulator surface of an operating system. The system will be properly charged if these temperatures feel the same.
- Operate the heater and A/C control selector (mode) lever, which distributes air from the appropriate outlets. Verify that the lever operates correctly and smoothly.
Control Settings | System Response | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fan Switch | Mode Switch | A/C Push Button | A/C Signal | A/C Indicator | Comments | |||||||||
ON | U, B, L | OFF | LOW | OFF | The A/C signal and the A/C indicator are on according to the position of the push button when the mode switch is in any of the following positions:
| |||||||||
ON | U, B, L | OFF | LOW | OFF | ||||||||||
ON | U, B, L | ON | HIGH | ON | ||||||||||
ON | U, B, L | ON | HIGH | ON | ||||||||||
ON | M, BL, DF | OFF (3) | HIGH (1) | OFF | When in Max (Pontiac Only), Blend or Defrost mode, the following conditions occur:
| |||||||||
ON | M, BL, DF | OFF (3) | HIGH (1) | OFF | ||||||||||
ON | M, BL, DF | ON (3) | HIGH | ON | ||||||||||
ON | M, BL, DF | ON (3) | HIGH | ON | ||||||||||
OFF | U, B, L | (2) | LOW (1) | OFF | When the fan switch is off, the following conditions occur:
| |||||||||
OFF | U, B, L | (2) | LOW (1) | OFF | ||||||||||
OFF | BL, DF | (2) | LOW (1) | OFF | ||||||||||
1. Default Condition 2. Not Allowed 3. Previous Switch State | ||||||||||||||
M-Max (Pontiac Only) U-Upper B-Bi-Level L-Lower BL-Blend DF-Defrost | ||||||||||||||
Control Settings | System Response | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fan Switch | Mode Switch | A/C Push Button | OSA/REC Push Button | Recirculation Vacuum | Recirculation Indicator | OSA Indicator | Comments | ||||||
ON | U, B, L | OFF | OSA | OFF | OFF | ON | The vacuum and the indicators are on according to the position of the push buttons when the mode switch is in any of the following positions:
| ||||||
ON | U, B, L | OFF | RECIRC | ON | ON | OFF | |||||||
ON | U, B, L | ON | OSA | OFF | OFF | ON | |||||||
ON | U, B, L | ON | RECIRC | ON | ON | OFF | |||||||
ON | BL, DF | OFF (3) | OSA | OFF | OFF | ON | The vacuum defaults to off and the OSA indicator is lit when the mode switch is in the following settings:
| ||||||
ON | BL, DF | OFF (3) | RECIRC (2) | OFF (1) | OFF | ON | |||||||
ON | BL, DF | ON (3) | OSA | OFF | OFF | ON | |||||||
ON | BL, DF | ON (3) | RECIRC (2) | OFF (1) | OFF | ON | |||||||
OFF | U, B, L | (2) | OSA | OFF | OFF | ON | When the fan switch is off, the vacuum and the indicators follow the settings according to the position of the push buttons. | ||||||
OFF | U, B, L | (2) | RECIRC | ON | ON | OFF | |||||||
OFF | BL, DF | (2) | (2) | OFF (1) | OFF | ON | |||||||
1. Default Condition 2. Not Allowed 3. Previous Switch State | |||||||||||||
U-Upper B-Bi-Level L-Lower BL-Blend DF-Defrost | |||||||||||||
