Inspect the condition of all hoses and clamps:
| • | Inspect the hoses for flexibility and no signs of bulging. |
| • | Inspect the hoses for cracks, cuts, kinks and areas of possible
leaks. |
| • | Inspect the brackets, supports, ties and clamps. |
| • | Replace and adjust the hoses and clamps as needed. |
Clean the front face of the radiator annually.
| • | Clean the front face of the condenser. |
| • | Remove bugs, leaves, etc. by blowing compressed air through the
radiator. |
| | Blow the air from the rear toward the front. If compressed air is not
available a water hose can be used to force water through the radiator. |
| | Use water only with the engine not running and cool. |
Do not brush the radiator fins. The radiator fins are necessary for
good heat transfer. Brushing damages the fins and reduces heat transfer.
Important: It is important that the front of the radiator is kept clear for proper
cooling.
For other maintenance recommendations and system capacities, refer to
the following procedures:
