Tail Lamp Replacement TrailBlazer

1. Remove the 2 screws that retain the tail lamp assembly to the body.
2. Pull the assembly directly rearward in order to release the 2 locking pins.
3. Disconnect the tail lamp electrical connector.
4. Remove the lamp assembly from the vehicle.
5. Remove the tail lamp circuit board. Refer to Tail Lamp Circuit Board Replacement .

1. Install the tail lamp circuit board. Refer to Tail Lamp Circuit Board Replacement .
2. Connect the tail lamp electrical connector.
3. Push the tail lamp assembly directly forward in order to seat the 2 locking pins.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the 2 tail lamp assembly retaining screws.

Tighten
Tighten the screws to 1.9 N·m (17 lb in).