GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2003 🢒 Bravada - 2WD 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the stabilizer shaft links to the stabilizer shaft retaining nuts. Refer to Stabilizer Shaft Link Replacement .

    3. Object Number: 731561 Size: SH
  3. Remove the stabilizer shaft insulator clamp mounting bolts.
  4. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
  5. Remove the stabilizer shaft insulators from the stabilizer shaft.
  6. Remove the stabilizer shaft from the vehicle.

Installation Procedure

    Object Number: 731561 Size: SH
  1. Install the stabilizer shaft to the vehicle.
  2. Install the stabilizer shaft insulators to the stabilizer shaft.
  3. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the stabilizer shaft insulator clamp mounting bolts.

    5. Tighten
    Tighten the stabilizer shaft insulator clamp mounting bolts to 55 N·m (41 lb ft).

  5. Install the stabilizer shaft links to the stabilizer shaft. Refer to Stabilizer Shaft Link Replacement .
  6. Lower the vehicle.