Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Relay Block | LH of the dash, right of the IP Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Body Control Module (BCM) Connector C1, Brown (24 Cavities) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Remote Control Door Lock Receiver | On the LH IP sound insulator | ||
Underhood Fuse Block | On the top of the left inner wheelwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
G103 (2.2L Engine) | (CKT 351) Engine harness, RH Front of the engine block, under the generator | Harness Routing Views in Wiring Systems | -- |
G103 (4.3L Engine) | (CKT 351) Engine harness, RH Rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G105 (2.2L Engine) | (CKT 450, CKT 451) Engine harness, to the RH rear of the engine block, near the Ignition Control Module | Harness Routing Views in Wiring Systems | -- |
G105 (4.3L Engine) | (CKT 450, CKT 451) Engine harness, LH Rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G200 | (CKT 1850) Body harness, to the LF of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
G201 | (CKT 1850) Body harness, to the LF of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
P100 | IP bulkhead pass-through, LH rear of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S106 (2.2L Engine) | (CKT 351) Engine harness, between the breakouts to the PCM and to the fuel injector connector, 25 cm (9.8 in) from the breakouts to the PCM | Harness Routing Views in Wiring Systems | -- |
S106 (4.3L Engine) | (CKT 351) Engine harness, between the breakouts to the rear heated oxygen sensors connector and the body harness connector, 7 cm (2.8 in) from the breakout to the heated oxygen sensor connector | Harness Routing Views in Wiring Systems | -- |
S152 (2.2L Engine) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the fuel injector connector and the Ignition Control Module, 7 cm (2.8 in) from G105 | Harness Routing Views in Wiring Systems | -- |
S152 (4.3L Engine) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the LH rear and RH rear engine block grounds, 15 cm (5.9 in) from the breakout to the LH rear engine grounds | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP202 | (CKT 379, CKT 1850) Strapped to the body harness, at the LH center of the IP | Harness Routing Views in Wiring Systems | -- |
