Name | Location | Locator View | Connector End View |
|---|---|---|---|
A/C Compressor Clutch | Part of the A/C compressor | ||
A/C Compressor Clutch Diode (2.2L Engine) | 20 cm toward the main engine harness from the A/C compressor connector | -- | |
A/C Compressor Clutch Diode (4.3L Engine) | In the engine harness breakout, 8 cm from the breakout to the A/C compressor high pressure switch | -- | |
A/C Compressor Clutch Relay | In the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | -- |
A/C Compressor Cycling Switch (4.3L Engine) | At the A/C accumulator | ||
A/C Compressor High Pressure Cutoff Switch (4.3L Engine) | Rear of the A/C compressor | ||
A/C Refrigerant Pressure Sensor (2.2L Engine) | On the A/C evaporator tube | ||
Air Temperature Valve Sensor and Motor | RH top of the heater | HVAC Component Views in HVAC Systems with A/C - Automatic | HVAC Connector End Views in HVAC Systems with A/C - Automatic |
Blower Motor (w/ Manual A/C) | RH Rear of the engine compartment | ||
Blower Motor Relay (w/ Manual A/C) | Center rear of the engine compartment, on the plenum front panel | Lighting Systems Connector End Views in Lighting Systems | |
Blower Motor Resistor | LH rear of the engine compartment, on the blower box | ||
Heater and A/C Controller (w/ Man A/C) Connector C1 (10 Cavities) (Heater Control Lamp) | Bottom center connector | ||
Heater and A/C Controller (w/ Man A/C) Connector C2 (3 Cavities) (Heater Control Lamp) | Next to the vacuum harness connector | ||
Heater and A/C Controller (w/ Man A/C) Connector C3 (3 Cavities) | Top center connector | ||
Heater and A/C Controller (w/ Man A/C) Connector C4 (5 Cavities) | Upper center of the IP | ||
Heater and A/C Controller (w/ Man A/C) Connector C5 (4 Cavities) (Except Base Pickup) | Between connectors C1 and C3 | ||
Heater Controller Connector C1 (10 Cavities) | Upper center of the IP | Heater Blower Controls Component Views in Heating, Ventilation and Air Conditioning | Heater Blower Controls Connector End Views in Heating, Ventilation and Air Conditioning |
Heater Controller Connector C2 (5 Cavities) | Next to the vacuum harness connector | Heater Blower Controls Component Views in Heating, Ventilation and Air Conditioning | Heater Blower Controls Connector End Views in Heating, Ventilation and Air Conditioning |
IP Fuse Block | LH of the IP, near the door jamb switch, LF | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Powertrain Control Module (PCM) Connector C1 (2.2L Engine) | On the right side of the engine compartment | Engine Controls Component Views in Engine Controls - 2.2L | Powertrain Control Module Connector End Views in Engine Controls - 2.2L |
Powertrain Control Module (PCM) Connector C2 (2.2L Engine) | On the right side of the engine compartment | Engine Controls Component Views in Engine Controls - 2.2L | Powertrain Control Module Connector End Views in Engine Controls - 2.2L |
Underhood Fuse Block | On the top of the left inner wheelwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) (4.3L Engine) | RH of the engine compartment | -- | -- |
Vehicle Control Module (VCM) (4.3L Engine) Connector C3 Clear (32 Cavities) | RH of the engine compartment | -- | VCM Connector End Views in Engine Controls - 4.3L |
C101 (16 Cavities) (2.2L Engine) | Engine harness to body harness, RH of the engine compartment, near the PCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C101 (10 Cavities) (4.3L Engine) | Engine harness to body harness, RH of the engine compartment, near the VCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | Body harness to IP harness, to the RH of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C209 (16 Cavities) (Pickup) | Body harness to dome harness, at the LF of the IP, at the LF window | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C209 (16 Cavities) (Utility) | Body harness to dome harness, at the LF of the IP, at the LF window | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G102 (2.2L Engine) | At the engine harness, RH Front of the engine block, under the generator | Harness Routing Views in Wiring Systems | -- |
G102 (4.3L Engine) | Engine harness, RH rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G103 (2.2L Engine) | (CKT 351) Engine harness, RH Front of the engine block, under the generator | Harness Routing Views in Wiring Systems | -- |
G103 (4.3L Engine) | (CKT 351) Engine harness, RH Rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G105 (2.2L Engine) | (CKT 450, CKT 451) Engine harness, to the RH rear of the engine block, near the Ignition Control Module | Harness Routing Views in Wiring Systems | -- |
G105 (4.3L Engine) | (CKT 450, CKT 451) Engine harness, LH Rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G117 | (CKT 850) Body harness, to the LH rear of the engine compartment, near the cruise control module | Harness Routing Views in Wiring Systems | -- |
G200 | (CKT 1850) Body harness, to the LF of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
G201 | (CKT 1850) Body harness, to the LF of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
G203 | (CKT 1050) Body harness, to the RH of the IP, between C203 and the splice packs | Harness Routing Views in Wiring Systems | -- |
G204 | (CKT 1050) Body harness, to the RH of the IP, between C203 and the splice packs | Harness Routing Views in Wiring Systems | -- |
P100 | IP bulkhead pass-through, LH rear of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S103 (2.2L Engine w/ A/C) | (CKT 350) Engine harness, on the anode side of the A/C compressor clutch diode, in the breakout to the A/C compressor and cutoff switch | Harness Routing Views in Wiring Systems | -- |
S103 (4.3L Engine w/ A/C) | (CKT 350) Engine harness, on the anode side of the A/C compressor clutch diode, in the breakout to the A/C compressor and cutoff switch | Harness Routing Views in Wiring Systems | -- |
S104 (2.2L Engine w/ A/C) | (CKT 59) Engine harness, on the cathode side of the A/C compressor clutch diode, in the breakout to the A/C compressor and cutoff switch | Harness Routing Views in Wiring Systems | -- |
S104 (4.3L Engine w/ A/C) | (CKT 59) Engine harness, on the cathode side of the A/C compressor clutch diode, in the breakout to the A/C compressor and cutoff switch | Harness Routing Views in Wiring Systems | -- |
S106 (2.2L Engine) | (CKT 351) Engine harness, between the breakouts to the PCM and to the fuel injector connector, 25 cm from the breakouts to the PCM | Harness Routing Views in Wiring Systems | -- |
S106 (4.3L Engine) | (CKT 351) Engine harness, between the breakouts to the rear heated oxygen sensors connector and the body harness connector, 7 cm from the breakout to the heated oxygen sensor connector | Harness Routing Views in Wiring Systems | -- |
S118 (4.3L Engine) | (CKT 850) Body harness, between the breakouts to the blower motor and the blower motor relay | Harness Routing Views in Wiring Systems | -- |
S152 (2.2L Engine) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the fuel injector connector and the Ignition Control Module, 7 cm from G105 | Harness Routing Views in Wiring Systems | -- |
S152 (4.3L Engine) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the LH rear and RH rear engine block grounds, 15 cm from the breakout to the LH rear engine grounds | Harness Routing Views in Wiring Systems | -- |
S205 | (CKT 1220) IP harness, between the breakouts for the radio and BCM connector C3, 8 cm from the breakout to the radio | Harness Routing Views in Wiring Systems | -- |
S215 (w/o Auto A/C) | (CKT 64) IP harness, in the breakout to the heater controller connectors, 10 cm into the breakout | Harness Routing Views in Wiring Systems | -- |
S217 (w/o Auto A/C) | (CKT 341) IP harness, in the breakout to the heater controller connectors, 6 cm into the breakout | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP202 | (CKT 379, CKT 1850) Strapped to the body harness, at the LH center of the IP | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP203 | (CKT 1050) IP harness, on the IP, in front of the ashtray, strapped to the Body Harness | Harness Routing Views in Wiring Systems | -- |
