Filler Tube Replacement Pickup

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
3. Raise the vehicle.



4. Wipe the vent hose connection at the fuel tank and then disconnect the vent tube and clamp (1).
5. Wipe the fuel filler tube connection at the fuel tank and then disconnect the fuel filler tube and clamp (1).
6. Disconnect the filler tube ground strap (2).



7. Remove the fuel tube attaching screws and the fuel filler tube.

1. Install the fuel filler tube and the fuel filler tube attaching screws.



2. Connect the fuel filler vent hose and clamp (1).
3. Connect the fuel filler tube hose and clamp.
4. Connect the filler tube ground strap (2).

Reinstall the fuel tank filler cap.

5. Reconnect the negative battery cable.
6. Check for leaks.

Filler Tube Replacement 4DR. Utility

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
3. Raise the vehicle.



4. Wipe the vent hose connection at the fuel tank and then disconnect the vent tube and clamp (2).
5. Wipe the fuel filler tube connection at the fuel tank and then disconnect the fuel filler tube and clamp (2).
6. Disconnect the filler tube ground strap (1).



7. Remove the fuel tube attaching screws and the fuel filler tube.

1. Install the fuel filler tube and the fuel filler tube attaching screws.



2. Connect the fuel filler vent hose and clamp (2).
3. Connect the fuel filler tube hose and clamp (2).
4. Connect the filler tube ground strap (1).

Reinstall the fuel tank filler cap.

5. Reconnect the negative battery cable.
6. Check for leaks.

Filler Tube Replacement 2DR. Utility

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
3. Raise the vehicle.



4. Wipe the vent hose connection at the fuel tank and then disconnect the vent tube and clamp (2).
5. Wipe the fuel filler tube connection at the fuel tank and then disconnect the fuel filler tube and clamp (2).
6. Disconnect the filler tube ground strap (1).



7. Remove the fuel tube attaching screws and the fuel filler tube.

1. Install the fuel filler tube and the fuel filler tube attaching screws.



2. Connect the fuel filler vent hose and clamp (2).
3. Connect the fuel filler tube hose and clamp (2).
4. Connect the filler tube ground strap (1).

Reinstall the fuel tank filler cap.

5. Reconnect the negative battery cable.
6. Check for leaks.