GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2002 🢒 Alero 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Lock Actuator Replacement

Removal Procedure
  1. Remove the rear door lock. Refer to Rear Door Lock Replacement .

    2. Object Number: 748006 Size: SH
  2. Remove the actuator screws (2).
  3. Remove the actuator (1) from the lock.

Installation Procedure

    Object Number: 748006 Size: SH
  1. Position the rear door lock actuator (1) on the lock.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the actuator screws (2).

    3. Tighten
    Tighten the door lock actuator screws to 6 N·m (53 lb in).

  3. Install the rear door lock. Refer to Rear Door Lock Replacement .