- Install air injection check valve pipe adapters, rear.
- Install air injection check valve pipe adapters, front.
- Install air injection check valve rear bracket and nuts.
- Install air injection check valve front bracket, bolt and nut.
- Install air injection check valve rear.
- Install air injection check valve nut, rear.
- Install air injection check valve front.
- Install air injection check valve nut front.
- Install air injection solenoid switch and bolt.
- Install air injection check valve pipe, clamps, and bolt.
- Install air injection vacuum hose.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the air injection check valve pipe adapters to 30 N·m
(22 lb ft).
Tighten
Tighten the air injection check valve pipe adapters to 30 N·m
(22 lb ft).
Tighten
Tighten the air injection check valve rear bracket nuts to 25 N·m
(18 lb ft).
Tighten
Tighten the air injection check valve front bracket bolt and nut to
25 N·m (18 lb ft).
Tighten
Tighten the air injection check valve to 20 N·m (15 lb ft).
Tighten
Tighten the air injection check valve nut rear to 10 N·m
(89 lb in).
Tighten
Tighten the air injection check valve front to 20 N·m (15 lb ft).
Tighten
Tighten the air injection check valve nut to 10 N·m (89 lb in).
Tighten
Tighten the air injection solenoid switch bolt to 10 N·m
(89 lb in).
Tighten
Tighten the air injection check valve pipe bolt to 10 N·m
(89 lb in).
