GM Service Manual Online
For 1990-2009 cars only

Parking Brake Rear Cable Replacement Disc Brakes

Tools Required

J 37043 Parking Brake Cable Release Tool

Removal Procedure


    Object Number: 479671  Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the rear brake cable at the equalizer (3).
  3. Using theJ 37043 Parking Brake Cable Release Tool, remove the cable from the mounting bracket (2).

  4. Object Number: 479652  Size: SH
  5. Remove the parking brake cable retaining clip (1).
  6. Disconnect the cable (2) from the actuator lever.
  7. Remove the parking brake cable from the vehicle.

Installation Procedure


    Object Number: 479652  Size: SH
  1. Place the cable in position.
  2. Install the cable on the actuator lever.
  3. Install the parking brake cable retaining clip (1).

  4. Object Number: 479671  Size: SH
  5. Install the cable to the cross member.
  6. Connect the rear brake cable at the equalizer (3).
  7. Lower the vehicle.
  8. Adjust the parking brake. Refer to Park Brake Adjustment .

Parking Brake Rear Cable Replacement Drum Brakes

Tools Required

J 37043 Parking Brake Release

Removal Procedure


    Object Number: 175008  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the brake shoes. Refer to Brake Shoe Replacement in Drum Brakes.
  3. Disconnect the cable from the park brake lever. Refer to Parking Brake Front Cable Replacement in Park Brake.
  4. Remove the cable from the backing plate using the J 37043 .
  5. Disconnect the left rear park brake cable (1) from the equalizer (2) and connector.

  6. Object Number: 486685  Size: SH
  7. Disconnect the cable (3) from the bracket (4) using the J 37043 .

Installation Procedure

Notice: Parking brake adjustment is not necessary. This is a self adjusting system and damage may result from attempting to adjust or modify this system in any way. It may be necessary to adjust the rear brakes to obtain the proper tension in the system.


    Object Number: 175008  Size: SH
  1. Connect the cable (1) to the equalizer (2) and connector.

  2. Object Number: 486685  Size: SH
  3. Connect the cables (3) to the bracket (4).
  4. Connect the cable to the backing plate.
  5. Connect the cable to the park brake lever. Refer to Parking Brake Front Cable Replacement in Park Brake.
  6. Install the brake shoes. Refer to Brake Shoe Replacement in Drum Brakes.
  7. Lower the vehicle.