GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Alero 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Regulator Motor Replacement

Removal Procedure
  1. Remove the rear window regulator. Refer to Rear Side Door Window Regulator Replacement .

    2. Object Number: 736565 Size: SH
  2. Disconnect the rear window regulator motor electrical connector.
  3. Remove the rear window regulator motor screws.
  4. Remove the rear window regulator motor from the rear window regulator.

Installation Procedure

    Object Number: 736565 Size: SH
  1. Position the rear window regulator motor to the rear window regulator.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the rear window regulator motor screws.

    3. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  3. Install the rear window regulator motor electrical connector.
  4. Install the rear window regulator. Refer to Rear Side Door Window Regulator Replacement .