Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Wiper/Washer Systems

1. Turn ON the ignition, with the engine OFF.
2. Turn the wiper/washer switch to LO.
3. Turn the wiper/washer switch to HI.
4. Turn OFF the wiper/washer switch.

Do the windshield wipers operate properly?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Disconnect the wiper/washer switch connector.

Do the windshield wipers stop?

Go to Step 5

Go to Step 4

Test the following circuits for a short to voltage:

Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 7

Go to Step 6

Replace the windshield wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

Did you complete the replacement?

Go to Step 7

--

Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement .

Did you complete the replacement?

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3