GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 54950  Size: SH
  1. Remove the oil level indicator tube bolt.
  2. Remove the oil level indicator tube from the engine.

Installation Procedure


    Object Number: 54950  Size: SH
  1. Install the oil level indicator tube to the engine. Ensure that the tube assembly is fully seated in the engine.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the oil level indicator tube bolt.
  4. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).