Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Column Shift

1. Remove the upper and lower shrouds. Refer to Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle .



2. Remove the wire harness assembly (1) from the wire harness strap (2).
3. Disconnect the turn signal and multifunction switch assembly connector from the SRS coil assembly connector.



4. Slide the 2 connectors (2) of the turn signal and multifunction switch assembly out of the bulkhead connector (1).



5. Remove the 2 pan head tapping screws (1) from the turn signal and multifunction switch assembly (2).
6. Remove the turn signal and multifunction switch assembly (2) from the steering column tilt head assembly.

Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Floor Shift

1. Remove the upper and lower shrouds. Refer to Trim Covers, Shift Lever Seal - Disassemble - Off Vehicle .



2. Remove the wire harness strap (2) from the wire harness assembly (1) and the steering column.
3. Disconnect the turn signal and multifunction switch assembly connector from the SRS coil assembly connector.



4. Slide the 2 connectors (2) of the turn signal and multifunction switch assembly out of the bulkhead connector (1).



5. Remove the 2 pan head tapping screws (1) from the turn signal and multifunction switch assembly (2).
6. Remove the turn signal and multifunction switch assembly (2) from the steering column tilt head assembly.