GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2007 🢒 Isuzu MD F-Series 🢒 Engine 🢒 Engine Controls and Fuel - 7.8L (LG4) 🢒 Accelerator Pedal Position Sensor Replacement

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

    2. Object Number: 1409572 Size: SH
  2. Disconnect the pedal switch connector.
  3. Remove the 3 accelerator pedal switch bolts and nuts and the accelerator pedal.

Installation Procedure

    Object Number: 1409572 Size: SH
  1. Install the accelerator pedal switch to the bracket with 3 bolts and nuts.
  2. Connect the pedal switch connector
  3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .