GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2008 🢒 I-370 🢒 Suspension 🢒 Front Suspension 🢒 Torsion Bar Anchor Replacement

Removal Procedure
  1. Remove the torsion bar. Refer to Torsion Bar Replacement .

    2. Object Number: 1253352 Size: SH
  2. Remove the nuts and the bolts from the lower control arm.

    3. Object Number: 1253355 Size: SH
  3. Remove the torsion bar anchor.

Installation Procedure

    Object Number: 1253355 Size: SH
  1. Install the torsion bar anchor.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1253352 Size: SH
  2. Install the nuts and the bolts to the lower control arm.

    3. Tighten
    Tighten the nuts to 80 N·m (59 lb ft).

  3. Install the torsion bar. Refer to Torsion Bar Replacement .