GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2008 🢒 I-370 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Headlamp Switch Replacement

Removal Procedure
  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .

    2. Object Number: 1326608 Size: SH
  2. Remove the screw retaining the switch to the instrument panel (I/P).
  3. Partially remove the switch from the I/P.
  4. Disconnect the switch electrical connector.
  5. Remove the switch from the vehicle.

Installation Procedure

    Object Number: 1326608 Size: SH
  1. Position the switch to the I/P.
  2. Connect the electrical connector to the switch.
  3. Install the switch to the I/P.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the screw retaining the switch to the I/P.

    5. Tighten
    Tighten the screw to 2.5 N·m (22 lb in).

  5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .