For 1990-2009 cars only
Removal Procedure
- Raise and support the hood.
- Remove both wiper arms. Refer to Windshield Wiper Arm Replacement .
- Remove the fixed antenna mast. Refer to Fixed Antenna Mast Replacement .
- Remove the retainers (1, 3, 5) securing the air inlet panel grille (2) to the cowl panel.
- Remove the air inlet panel from around the hood hinges.
- Roll the air inlet panel (4) forward.
- Disconnect the hose from the washer nozzles (2, 3).
- Press the tabs on the washer nozzles and remove the nozzles from the air inlet panel.
- Remove the washer nozzle from the air inlet panel.
Installation Procedure
- Position the nozzles to the air inlet panel.
- Press the nozzles into the panel in order to secure.
- Install the hose to the nozzles (2, 3).
- Secure the hose to the air inlet panel.
- Ensure the foam washers (2) are secure to the retainers (1) prior to installing the air inlet grille panel (3) to the cowl.
- Position the air inlet panel around the hood hinges.
- Secure the retainers (1) to the cowl panel.
- Install the retainers (5) to the air inlet panel (2) in order to secure.
- Install the fixed antenna mast. Refer to Fixed Antenna Mast Replacement .
- Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
- Close the hood.
- Test the washer spray pattern.
