GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the liftgate window garnish molding. Refer to Rear Window Garnish Molding Replacement in Interior Trim.
  2. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement in Interior Trim.

  3. Object Number: 721377  Size: SH
  4. Remove the bolts that retain the latch to the liftgate.
  5. Disconnect the electrical connector.
  6. Remove the latch from the liftgate.

Installation Procedure


    Object Number: 721377  Size: SH
  1. Position the latch to the liftgate.
  2. Connect the electrical connector.
  3. Install the bolts that retain the latch to the lift gate.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Adjust the portion of the latch to allow the lift gate window striker enter the center of the latch.
  6. Tighten
    Tighten the latch bolts to 10 N·m (89 lb in).

  7. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement in Interior Trim.
  8. Install the liftgate window garnish molding. Refer to Rear Window Garnish Molding Replacement in Interior Trim.