Schematic Reference: Wiper/Washer Schematics

Connector End View Reference: Wiper/Washer Connector End Views

DEFINITION: The rear window washer is inoperative and the rear window wiper operates normally.

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Turn ON the ignition.
2. Press the rear window washer switch.

Does the rear window washer operate normally?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

1. Disconnect the rear washer pump connector.
2. Connect a test lamp across the rear washer pump harness connector terminals.
3. Turn ON the ignition.
4. Press the rear window washer switch.

Does the test lamp illuminate?

Go to Step 6

Go to Step 4

Test the rear washer pump control circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 9

Go to Step 5

Test the rear washer pump ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs .

Did you find and correct the condition?

Go to Step 9

Go to Step 8

Inspect for poor connections at the rear washer pump. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 9

Go to Step 7

Replace the rear washer pump. Refer to Rear Window Washer Pump Replacement .

Did you complete the replacement?

Go to Step 9

--

Replace the rear washer relay.

Did you complete the replacement?

Go to Step 9

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3