GM Service Manual Online
For 1990-2009 cars only

Step

Action

Values

Yes

No

1

Did you perform the Diagnostic System Check - Vehicle?

--

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

2

Start the engine.

Does the battery charge indicator remain illuminated after the 5-second bulb check?

--

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

3

  1. Install a scan tool.
  2. With a scan tool, observe the Battery Voltage parameter in the instrument panel cluster (IPC) data list.

Does the voltage measure within the normal operating range?

10-15 V

Go to Step 4

Go to Charging System Test

4

Replace the IPC. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming.

Did you complete the replacement?

--

Go to Step 5

--

5

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2