GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Ascender - 2WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Seat Cushion Outer Trim Panel Replacement

Removal Procedure
  1. Remove the trim panel from the power seat by performing the following:
    2. 1.1. Remove the 3 seat switch bezel mounting screws. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement.

    Object Number: 752954 Size: SH
    1.2. Remove the 3 trim panel retaining screws.
  2. Remove the trim panel from the manual seat by performing the following steps:
    3. 2.1. Remove the lumbar support knob. Refer to Lumbar Support Knob Replacement.
    2.2. Remove the seat back recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement.

    Object Number: 755843 Size: SH
    2.3. Remove the screws from the trim panel.
  3. Remove the trim panel from the seat assembly.

Installation Procedure
  1. Install the trim panel to the power seat by performing the following steps:

    2. Object Number: 752954 Size: SH
    1.1. Align the trim panel to the seat assembly.

    Caution: Refer to Fastener Caution in the Preface section.

    1.2. Install the screws retaining the trim panel to the seat assembly.

    Tighten
    Tighten the trim panel screws to 3 N·m (26 lb in).

    1.3. Install the 3 seat switch bezel mounting screws.

    Tighten
    Tighten the seat switch bezel mounting screws to 3 N·m (26 lb ft).

  2. Install the trim panel to the manual seat by performing the following steps:

    3. Object Number: 755843 Size: SH
    2.1. Install the screws in the trim panel.
    2.2. Install the lumbar support knob. Refer to Lumbar Support Knob Replacement.
    2.3. Install the seat back recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement.