Windshield Wiper and Washer Switch Replacement RHD

1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.



2. Press the top and bottom retaining tabs (2) in and Pull the wiper/washer switch (3) out if the column assembly.
3. Disconnect the wiper/washer switch electrical connector (1).
4. Remove the wiper/washer switch (1).

1. Connect the wiper/washer switch electrical connector (1).
2. Install the Wipers/Washer signal switch (3) to the steering column. Listen for an audible click from the retaining tabs (2) to confirm fitting.
3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
4. Test wiper and washer system for correct operation.

Windshield Wiper and Washer Switch Replacement LHD

1. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.



2. Press top and bottom tabs in and Pull the wiper/washer switch out if the column assembly.
3. Disconnect the wiper/washer switch electrical connector.

1. Install the Wipers/Washer signal switch to the steering column. Listen for an audible click to confirm fitting.
2. Connect the wiper/washer switch electrical connector.
3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
4. Test wiper and washer system for correct operation.